Maytag washer / spin system
Maytag Washer Not Spinning: Causes, Checks, and Repair Cost
A Maytag washer that will not spin may have a drain issue, unbalanced load, lid lock problem, belt issue, or motor/control fault.
Quick answer
What it means
A Maytag washer that will not spin often starts with draining, load balance, lid lock, or belt checks. The spin system should not be diagnosed before confirming the tub drains fully.
Typical repair$120-$380
UrgencyMedium
Repair or replaceFix first if the washer drains and the issue is load, belt, or lid-lock related.
Likely causes
- Tub not draining before spin
- Unbalanced load
- Lid lock or door lock fault
- Worn belt or motor issue
Safe first checks
- Confirm the washer drains fully before spin.
- Redistribute heavy items and run a drain-and-spin cycle.
- Listen for a lock click and motor hum.
- Check the model manual before inspecting belts or panels.
Likely parts and repair cost
Typical repair range: $120-$380. Parts or systems commonly considered:
- Lid lock or door lock
- Drive belt
- Drain pump
- Motor or control board
Stop and call a pro when
- The basket is loose or scraping.
- The machine walks violently.
- Water reaches wiring or the floor near outlets.
Source trail
This guide starts with manufacturer support, public recall lookup, or safety references, then turns those sources into plain-language checks.
Questions people ask
Can a washer fail to spin because it did not drain?
Yes. Many washers will not spin properly until the tub is nearly empty.
Are wet clothes always a spin problem?
No. Wet clothes can come from poor drain, load imbalance, or spin failure.